Suhr A.C.E.

Suhr A.C.E. The A.C.E. (Analog Cabinet Emulator) is an active analog cabinet emulator designed to offer guitarists a portable and convenient way to capture the complex characteristics of a guitar speaker cabinet for a variety of recording (silent* or in a studio) and live performance applications without the use of a microphone. Controls: INPUT: This control functions only when using the From Amp input. It is used to set the volume of your amp signal before it goes through the filter. *This control can be set as desired as long as the Clip light does not turn on. If it does, turn the Input knob counter clockwise to prevent the filter from clipping. SUB: This control reduces or increases the amount of low frequency bass of the output HIGHS: This control reduces or increases the amount of middle and high frequencies of the output PRESENCE: This control reduces or increases the amount of presence fre- quencies of the output LIFT GROUND (XLR): This switch lifts the ground on the XLR output when flipped to the up position. BYPASS/ACTIVE: When set to Bypass, the filter is bypassed and the output is an unfiltered line level signal. When set to Active, the filter is engaged as in normal operation. PHASE (XLR): This switch flips the phase of the Balanced output (XLR) when flipped to the up position. Specifications: Input Impedance: 100 KOhm Output Impedance: 600 Ohm Power Connector: 9Vdc, center negative, 2.1mm x 5.5mm Operating voltage: 9Vdc, regulated Maximum Voltage: 10Vdc Reverse Battery Protection: Yes Over Voltage Protection: Yes Current Consumption: 80mA Estimated Battery Life: 4.5 hours continuous use Dimensions: 4.875”(W) x 3.875”(D) x 1.375”(H) Weight: 1.05 lbs ROHS Compliant: Yes