Suhr Jack Rabbit Tremolo V2

Suhr Jack Rabbit Tremolo V2 Contorls: Rate: Controls the speed of the tremolo effect, from 1Hz to 20Hz. Level: Controls the output level of the pedal, from +0dB to +14dB. Depth: Controls the depth of the tremolo effect. Waveform: Selects the modulation waveform which includes Sine, Square, Triangle, Reverse Ramp, and Ramp. Additional Features: True Bypass: Jack Rabbit is true bypass via a relay. This function allows for the remote switching, and the battery monitor feature. The relay produces less popping when switching the pedal on and off. FX Link: The FX Link connector allows the pedal’s switching and tap tempo function to be controlled from an external switch, pedal board, loop switcher, or any other custom interface. FX Link also provides the ability to power up in the On/Off state. Low Battery Monitor: A unique battery monitor circuit alerts the user to low battery conditions. In addition, the battery monitor will automatically switch the pedal to True Bypass if the battery voltage is too low for the circuitry to correctly operate. Specifications: SKU: 03-JAC-0001 INPUT IMPEDANCE: 1M Ohm OUTPUT IMPEDANCE: 600 Ohm POWER CONNECTOR: 9Vdc regulated, center negative, 2.1mm x 5.5mm OPERATING VOLTAGE: 5V to 18V (nominal 9V) MAXIMUM VOLTAGE: 20Vdc REVERSE BATTERY PROTECTION: Yes OVER VOLTAGE PROTECTION: Yes CURRENT CONSUMPTION: < 20mA ESTIMATED BATTERY LIFE: 25-50 hours of continuous use FX LINK CONNECTOR: 1/8" Stereo FX LINK MAX VOLTAGE: 3.3Vdc SHIELD → TIP: Activate On/Off SHIELD → RING: Activate Tap Tempo ROHS COMPLIANT: Yes DIMENSIONS: 2.5”(W) x 4.5”(D) x 1.25”(H) WEIGHT: 0.75lb